Blocked drain hydro-jetting uses a high-pressure water jet to scour a drain pipe clean along its length. A plunger or drain rod usually just pushes a hole through the blockage, so the fat, roots or sludge left on the pipe walls catch the next lot of waste, and the drain blocks again. This post explains the warning signs that you need blocked drain hydro-jetting, what causes drains to block, and what to expect, with a video of one of our jobs.
- Slow drains, gurgling and smells are early warnings. Do not wait for an overflow.
- Jetting clears the full pipe, not just the blockage at the opening.
- Grease line hydro-jetting costs R950 per line, and monthly contracts start at R950.
Five signs you need blocked drain hydro-jetting
- Slow drains in sinks, showers or baths, even after you clear the trap.
- Gurgling from plugholes or toilets when other fixtures drain.
- Bad smells from drains or the outside gully.
- Water backing up at the outside gully or a manhole after heavy use.
- Repeat blockages in the same spot every few weeks or months.
What causes blocked drains
- Fat, oil and grease from kitchens, which set on the pipe walls. This is the main cause in restaurants and commercial kitchens.
- Wipes and sanitary products, which do not break down like toilet paper.
- Sand and soil washing into outside gullies.
- Tree roots growing into older pipe joints.
How blocked drain hydro-jetting works
A jetting hose goes into the drain, and high-pressure water from the nozzle scours the pipe walls as it travels along the line. The loosened fat, sludge and debris flush down the line with the water. Because the whole pipe is cleaned, not just the point of the blockage, the drain flows properly for longer.
ON THE JOBVideo: Cape Town: drain hydro-jetting. Watch on YouTube
The warning signs, the causes and how to stop drains blocking again. Includes a checklist, our process and our prices.
Download the free guideBlocked drain hydro-jetting for restaurants and kitchens
Commercial kitchens send a lot of fat and grease down their lines, so blockages tend to happen during a busy service. Scheduled grease line jetting keeps the lines flowing, and you get a written report after every visit.
| Service | Price |
|---|---|
| Grease line hydro-jetting | R950 per line |
| Monthly grease line contract | From R950 per month |
| Home and rental drains | Quoted after we have seen the drain |
We jet grease lines, the drainage pipes from your kitchen. Pumping out grease trap contents needs a licensed waste company, and we can refer you to one. See grease line cleaning and our page for commercial property maintenance.
When it is a plumbing repair
If a pipe is broken, collapsed or badly displaced, jetting will not fix it. Plumbing repairs are handled through our network of vetted, licensed contractors, coordinated and invoiced by RSM. A site inspection is needed to quote: the R450 call-out is deducted from your invoice if you go ahead. Landlords can read how we handle blocked drains at rentals.
What to do when a drain blocks
- Stop running water into the blocked fixture so it does not overflow.
- Check the outside gully for leaves, sand or a visible blockage.
- Do not keep pouring chemical drain cleaners down the drain. They often do not clear the line and make the job unpleasant for whoever clears it.
- If water is backing up outside or into the house, call for help straight away.
WhatsApp us on 060 844 1615 with a photo of the drain or gully and we will advise you on the next step.
Five questions to ask before you hire anyone
- Do you jet the whole line, or just clear the blockage?
- Will I get a written report after the visit?
- What does it cost per line?
- Do you pump grease traps, or only clean the lines?
- Who handles repairs if the pipe is damaged?
Our answers for grease lines: we jet the full line, you get a written report, it costs R950 per line, we clean lines but do not pump grease traps, and repairs go through our vetted contractors.
Prevent the next blockage
- Scrape plates and pans into the bin, not the sink.
- Only flush toilet paper. Wipes go in the bin.
- Keep outside gullies covered and clear of sand and leaves.
- Book regular jetting for kitchens before lines block.
Blocked drain hydro-jetting: frequently asked questions
Is hydro-jetting better than rodding a drain?
Rodding usually pushes a hole through the blockage. Hydro-jetting scours the whole pipe clean, so the drain stays clear for longer.
How much does grease line jetting cost?
Grease line hydro-jetting is R950 per line, and a monthly grease line contract starts at R950 per month.
Do you pump out grease traps?
No. Pumping out grease trap contents needs a licensed waste company. We jet the grease lines and can refer you to one.
What if the pipe is broken?
Jetting will not fix a broken pipe. Plumbing repairs go through our vetted contractors. The R450 inspection call-out is deducted from your invoice if you go ahead.
Which areas do you cover?
Cape Town’s northern suburbs (Bellville, Loevenstein, Durbanville, Welgemoed, Brackenfell and Kuils River), southern and central suburbs (Constantia, Meadowridge, Bergvliet, Tokai, Claremont, Pinelands, Thornton and Mowbray), and Somerset West, Strand and Stellenbosch.
Get a fixed price from our own crew
Book a free site visit and we send a fixed written quote, with before and after photos of the finished job.
